Upgrading to Jungle Disk Workgroup 3.19 for Windows

We are excited to be releasing an update to the Jungle Disk Workgroup software for Windows! Please follow the below instructions to update your software. 

 

1. Go to www.jungledisk.com/downloads and download the Windows version of the Workgroup software. 

2. Double click the installer package that you downloaded to launch the installer. 

3. ​If you are prompted to "Install Device Software" from EldoS Corporation, click "Install." This is the driver that is used to show Network Drives in File Explorer.

4. ​Reboot your computer if you are prompted to do so.

IF YOU ALREADY HAD JUNGLE DISK 3.16 PREVIOUSLY INSTALLED, PLEASE FOLLOW THE BELOW INSTRUCTIONS

Please open the Activity Monitor and hit "Configure". 


Here, expand one of your Online, expand Network Drive, then click on Previous Versions.

 

You are not required to change this setting, but if this setting is turned on, we do recommend changing it to 5000. If there is a check in the checkbox next to this setting, it is enabled. If you have this disabled, you do not need to take any action. This setting determines the largest file size for which Jungle Disk will keep previous versions or deleted files available for restore. Using the recommended setting is up to you.

 

 

 

 

 

Was this article helpful?
0 out of 2 found this helpful
Powered by Zendesk